D312-3: Regulating my stitches!

I've spent these days getting used to the BSR (Bernina stitch regulator) attachment.  It's a foot with a mouse device built in, which detects how fast you are moving your fabric and adjusts the speed so that stitches are the same length.
There are two modes: 1 is stitch while the sewing pedal/button is pressed, 2 is stitch only when the fabric moves.  You can also detach the cord and use it as a regular darning foot.

Read these from right to left...

At least I got better...

Most recent effort, with notes

The notes show the BSR mode and stitch length, and then the last one was using the foot as a darning foot (detached BSR cord, feed dog dropped, regular straight stitch, length 3.0 I think).  The lines are where the lower thread has been pulled up to the surface.

I have a set of long margins and borders to quilt, and I thought this design would be a good beginner pattern.  This one below is also terribly pretty, very complimentary to the quilt, and I think it will cope with 'close enough for a beginning' quite well ;)

From Christina at A Few Scraps

 

There's no point me considering any of them, though, if I can't get my curves smooth.  And I've only been practising on a square foot of space - nice and light and easy to move - how am I going to go with a single-bed sized pieces! :S

The thread pulling seems to be a common problem with quilting.  I imagine it means I need to go slower around the corners.  It may also be that my upper tension is too high, but its' only at 4, so I'm not too sure about that...  I will be quilting this pattern on the back of the quilt though, so I'm not very worried about it because the stitches look fine on the front.

The reason I'm quilting "upside-down" for this part is that I need to draw the pattern onto the fabric.  However, I don't really have any spare fabric from the front design, so I can't test the pen and see how well it disappears.  Rather than take the risk, I'll draw it on the back, where I already know it will fade thanks to my practise pieces.  I can also manage the bulk I'm getting with the backing fabric having a lot of stretch.

Can I also add how rubbish it is to be sick?  It's only a passing sickness, but it's still no fun.  I have a terrible cold, just short of a flu.  My head is well full of clay, with achy teeth, cracked lips, watery eyes and a crackly chest.  I even have acne.  You know it's bad when your body tries to push it out via your skin. :(  I had gastro just a fortnight ago too.  Both these illnesses came via Bub and she coped with them well.  Her gastro was rubbish for a day, and the cold presented as three days of croup plus a few of misery, but my body's taken them on with full nerdy force and done both bugs with a thoroughness any librarian would envy.  Maybe that's why my blogging and craft have been so slack.  Anything I can't accomplish in front of the telly is a big deal at the mo.  Please get better body, for the start of term three!  I want to want to do things again!

D295: Stuffed and stuffed

Today I learned that when a pattern says it 'uses' a 3/8" seam allowance it means that it's included that allowance in the pattern pieces. Sad face.  Had to chop some bottom off all my pin covers.  I'm not sure it's going to fix the problem but I'll make it work somehow.

Here is a different but related example.  Sewing the rings on the ring stacking toy are clearly explained in the text, but lots of pictures, but not in the pattern.  The sewing vs cutting lines in the four base pieces are less clear.  I think dotted and dashed lines could've been used more consistently and it would've been a great help.

So, a general request to pattern makers, please be as consistent as possible across pattern pieces. Note things on the pattern pieces: "6mm SA included" for instance, or even the name of the pattern! As it is, when it dig up this very simple pattern in the future, I'll still have to go back and scour the instructions to be sure I get it right and I'm sure pattern pieces can be more helpful on their own.